Selecting a Mount Type
There are several types of mounts on offer. Fixed frame mounts will hold a screen rigid and in a particular position. The frame can be mounted on a wall, or placed on stands so that the entire assembly can be moved around. Fixed frame mounts can be a practical solution if you don't mind having the screen set up and deployed for use all the time.

In addition to fixed frame options, we supply retractable “roll up” screen mounts that can be bolted to a wall near the ceiling, to the ceiling itself, or even embedded in the ceiling. Motorized retractable screens (“electric screens”) can be raised and lowered at the push of a button. Manual retractable screen mounts are typically spring tension driven. They are less expensive, and can be lowered and raised by hand. The advantage of retractable screen mounts, of course, is that the screen can be made to disappear when not in use. If the room is a dedicated theater room, this may not be necessary. But if it is a multi-purpose room, having the ability to get rid of the screen when not in use is valuable.

Selecting a Screen Size
Some people say that the ideal viewing distance for home theater screens is 1.5 times the width of the screen. So if you plan to view the screen from a distance of twelve feet, the screen should be eight feet wide. This formula is wrong. Actually, all formulas are wrong. Screen size relative to viewing distance is purely a matter of personal taste, just as some people like to sit in the first row of a movie theater, and others like to sit as far back as possible. Keep in mind, however, that if you are viewing a large screen from a close distance, your eyes will not be able to resolve the entire image at once, and they will be moving around to capture the action. This can be uncomfortable over the two-hour duration of a movie.

Keep in mind that any given projector only has a fixed amount of light. So if you spread that light over a larger area, the picture will look less bright than it will if you focus all of that light on a smaller area. A common mistake that is made is going for the biggest possible screen, and overstretching the ability of the projector to produce an ideal picture. Yet even this is a matter of taste. Some people prefer a bigger image that is a little less bright and lower in contrast. Others will prefer to limit the image size in order to maximize brightness and contrast.

Selecting a Fabric or Screen Type
Screen material pretty much all looks white from a distance. But different fabrics have different characteristics, and you should pick one that is best for your needs. To help sort them out, give some thought to each of the following issues:

Gain: An important performance factor for a screen fabric is what is called its “gain.” This is a very simple concept. Some screen material will reflect light uniformly in all directions. When it does this, it is said to have “no gain.” If a screen has no gain, the picture you see on the screen will look the same no matter what angle of view you have to the screen. So if several people are watching the picture at different angles to the screen, they will all see essentially the same picture at the same brightness level.

Screen materials that have high gain will reflect more light back toward the center of the viewing area, and less light toward people sitting on the sides of the room. When this happens, people sitting in the middle of the audience will see a bright picture, and those sitting toward the sides will see a dimmer picture. You can see this effect yourself; as you move from the center to the side of a field of view, you can notice that the picture gets dimmer.

Screens have different gain factors: some are very high gain, others are moderate, and still others are low gain. The gain rating is quoted in numbers such as 1.0 (or “unity gain”), 1.3, 1.5, 1.8, 2.0, 2.5, etc. As the gain number increases, the brightness of the picture intensifies when viewed head-on, and falls off more dramatically as you move from the center to the side.

What does all this mean to you? Well, if you have an audience seated in a long and narrow room, then using a high gain screen makes sense, as it intensifies the illumination in the area where your audience is sitting. However, if the audience is seated at wide angles to the screen, you want to use a low gain fabric so that those on the outside don’t experience the dimming effect.

In the past, high gain screens were important because projector light output was relatively low. So any boost in image brightness was welcome. However, today's projectors are very bright indeed, and if you have a projector with sufficient light output, it is best to go with a no gain, or low gain screen since they give a more uniform picture over a wider angle of viewing. Videophiles setting up the best possible home theater systems go for low gain screens. Some of the manufacturers have screen products that they designate as ideal for home theater. Both of these have been popular for home theater use.

Acoustical transparency. Another factor to consider is whether you need an acoustically transparent fabric. This is one that will allow sound to pass through it from a speaker mounted directly behind the screen. If you are setting up a surround sound audio system with a left, center, right, and two surround speakers, the center speaker can be placed directly behind the screen for its best effect. If you do not have an acoustically transparent screen, the center speaker must be placed above or below the screen to avoid distortion. The effect is created by perforating the fabric with thousands of extremely small holes. If you intend to mount a speaker directly behind your screen.

Maintanence and cleaning - Some screen fabrics can be cleaned with soap and water. Others must be protected from any kind of damage or marks, as any attempt to clean them will impart additional damage to the fabric. So if you are setting your screen up in a business presentation area, you should anticipate that presenters will inadvertently mark the screen surface when they use an uncapped pen as a pointer, or slap the screen with a ruler to make a point. In an environment like this, it is important to choose a screen fabric that can be cleaned easily. On the other hand, if you are using a retractable mount in a home theater setting, the screen will be less susceptible to careless damage, and this may not be as important.

Selecting an Aspect ratio
Depending on the projection method to be used, the projected image will have a certain width/height relationship. For the best results, it is advisable to select a projection screen with the same ratio as that of the projected image. In general terms, a distinction may be made between the following aspect ratios:

All screens are available in a variety of sizes, both in 4:3 and 16:9 aspect ratios. (Aspect ratio is the ratio of the width to the height of the screen. Standard television is 4:3. The new widescreen high definition television format (HDTV) is 16:9. Most movies made today are wider than 16:9) Actually, you can get many fabrics cut to whatever size and custom aspect ratio you want. The question is—which is right for your set up?

This aspect ratio issue warrants some attention. First, let’s focus on this fact: almost all LCD and DLP projectors have a native 4:3 aspect ratio (that is, 4:3 is the aspect ratio of the LCD panels or the DLP chips that are inside the projector itself). The exception is most SXGA resolution projectors, which are native 5:4 (1280 x 1024).

Now if you have a projector that has a native 4:3 display, in order to get the maximum light output and maximum resolution of your projector onto the screen, the image being projected must be 4:3. This is entirely contrary to the logic that the HDTV 16:9 widescreen format will produce the best image quality. But the fact is that when you display a 16:9 image using a native 4:3 projector, you are not using the total pixel array and light output of the projector. Part of the display is masked to achieve the 16:9 format. This produces the horizontal black bars on a 4:3 screen that we are all familiar with. But the width of the image is usually the same in both formats.

If you intend to view 4:3 material, whether it be regular television programming, pan-and-scan tapes and DVDs, or computer generated data and graphics, you will get the maximum performance out of a native 4:3 projector by using and filling a 4:3 screen.

You have the option, of course, to install a 16:9 screen and set up the projector to fill it when it is displaying 16:9 material. However, when you switch to a 4:3 source, the projected image will typically overshoot the screen at the top and bottom. If set up within the range of the zoom lens, the zoom can be extended to shrink the 4:3 image down to where it fits within the top and bottom of the screen. You will then have black bars on the sides, and a full 4:3 image in the middle.

The problem here is that 4:3 is the highest resolution format that a 4:3 projector can produce. So you might as well set it up to get the biggest image in this format. When switching to 16:9 source material, since the projector masks part of the LCD or DLP display itself, it is most efficient to allow the image to be created with black bars at the top and bottom of the image on your 4:3 screen.